Audit & Certification
tuv
TÜV AUSTRIA Websites > TÜV Austria Egypt > Solution > Certification > Anti-bribery management system | ISO 37001

Solution: Anti-bribery management system | ISO 37001

Audit & Certification

Solution: Anti-bribery management system | ISO 37001

Ing. Klaus Mlekus, MBA

TÜV AUSTRIA-Platz 1 2345 Brunn am Gebirge Österreich

+43 5 0454 6067

Send email

FavoriteLoadingSave to My Bundle

Ing. Klaus Mlekus, MBA

FavoriteLoadingSave to My Bundle

TÜV AUSTRIA CERT GMBH

TÜV AUSTRIA-Platz 1
2345 Brunn am Gebirge
Tel: +43 (0)504 54-6048
Fax: +43 (0)504 54-8145
E-Mail: cert@tuv.at
tuv.at/cert

TÜV AUSTRIA Anti-bribery management systemISO 37001

In which region do you need this solution?

  • All regions

Certification Procedure ISO 37001

  • 1.

    Briefing

  • 2.

    Commissioning

  • 3.

    Pre-audit (optional)

  • 4.

    Level 1 certification audit

  • 5.

    Level 2 certification audit

  • 6.

    TÜV AUSTRIA certificate

  • 7.

    Surveillance audits

  • 8.

    Re-certification audit

Accreditation

"TÜV AUSTRIA certifies according to the anti-corruption management system ISO 37001 in terms of an effective corruption prevention program."

Information, Target Group & Requirements

The ISO 37001 is a generic and verifiable standard that contains detailed information on how an effective anti-corruption program can be implemented in a company. ISO 37001 specifies requirements and provides instructions for the establishment, realization, maintenance, verification and improvement of a management system to fight corruption.

The standard is based on three key models that are combined in a compliance management system model. This includes the “Risk Management System”, which turns ISO 37001 into a risk-based standard. Following the model of “High Level Structure”, the new standard corresponds with the structure of other management systems and can be integrated into or combined with existing management systems without any problems (e.g. ISO 9001 or ISO 14001). The third model on which the standard is based is the PDCA cycle. PDCA stands for “Plan, Do, Check, Act” and is aimed at a continuous improvement process.

Target Group: From microenterprises through to major industrial enterprises, from service providers to producers – across all industries, including public, private and not-for-profit sectors and irrespective of the type of company, you too can be certified pursuant to ISO 37001.

A documented compliance management system that is integrated in and practiced by the organization is required.

Your certificate is valid for three years and may be used for advertising purposes in accordance with the certification regulations.

Take a look at a sample certificate!

You are free to use the certification logo on your business stationery, website (in each case in connection with your organization), for example. Your planned use has to be approved/confirmed by the certification body for legal reasons.

Advantage

  • Competitive advantages in both private and public tendering procedures
  • Strengthening of a corporate culture that practices integrity, transparency and compliance
  • Corporate risks can be minimized and the costs of corruption can be potentially reduced
  • Strengthening of the company’s image with customers, business partners and the general public
  • The implementation of measures and checkpoints reduces the risks with respect to compliance and corruption
  • In the event of any disputes, the certification can serve as proof that your organization is dealing with the topic of corruption with due diligence
  • The standard ISO 37001 follows the same structure as ISO 9001, ISO 14001 and ISO 45001. The requirements can therefore be integrated into the existing management system with no great extra effort

Certification Procedure ISO 37001

An ISO 37001 certification usually takes between 2 and 4 weeks. We will determine the exact duration, effort as well as the costs together with you before the start of the certification. This is why every certification process begins with a briefing.

1. Briefing
We will explain the procedure to obtain your certificate in a non-binding and free meeting. Amongst those items that will be clarified in this meeting are:

  • Basis requirements for your certification
  • Goals and benefits of the certification
  • Comparison of the business data and definition of the scope of the certification
  • Discussion of your specific needs and wishes
  • Determination of the next steps that are needed for the certification

You will then receive an individual offer that is tailored to your organization on the basis of this briefing.

2. Commissioning
If our offer meets with your approval, the certification body is commissioned. Once you have received confirmation of your order, the certification process begins with a joint agreement of the timetable with the responsible auditor(s).

3. Pre-audit (optional)
A pre-audit can be carried out on request. However, this is not an essential requirement for certification.
Either specific areas and/or processes or the overall situation in your organization will be audited on the basis of a jointly defined framework. Any weak spots in the documentation and implementation of the system will be identified here. A pre-audit can provide you with a status report regarding the basic suitability for certification, a detailed expertise on individual processes or the conformity with individual requirements of the respective standard on request. The audit method hereby corresponds to that of the certification audit.

4. Level 1 certification audit
The level 1 audit serves to determine whether you are suitable for certification. Location-specific conditions are assessed and any necessary information with respect to the scope is collected. The level 1 audit primarily deals with the following main points:

  • Verification of the documentation for conformity and completeness compared to the requirements of the standard.
  • Status of the implementation of the management system within the company: Does the existing management and the level of implementation of the management system in the organization allow a certification in principle, or are any crucial details missing?

Before the level 2 audit is performed, an audit plan for the actual certification audit will be drafted on the basis of knowledge gained of your organization and the management system and jointly agreed upon with you.

5. Level 2 certification audit
During the level 2 audit, the efficacy of the management system in place in your company will be verified. Random checks will hereby be made with respect to all of the requirements in departments and organizational units as well as along the process chain.

This audit is based on:

  • The audit plan
  • The respective certification standard and/or individual standard requirements specified therein
  • Organization-specific documents
  • General and industry-specific principles (laws, additional, industry-specific, necessary standards,..)

Following an analysis and assessment of the results, you will be informed of the outcome of the audit and any deficiencies or deviations during the final review. Corrective measures will be specified in the event of deficiencies. Subsequently, a root cause analysis and any specific documented measure will once again be verified by the audit team.

6. TÜV AUSTRIA certificate
The actual certification will be issued by the certification body of TÜV AUSTRIA following a successful audit and reporting on the basis of the audit report. Provided the following certification requirements have been satisfied, there is no reason why the certificate should not be issued promptly:

  • Documentation and implementation of the management system
  • Certification agreement (confirmation of the certification offer, the certification regulations and the T&Cs )
  • Positive outcome of the audit and thus a corresponding recommendation by your audit team to the certification body

A certificate will be issued for a period of 3 years. In order to maintain the validity of the certificate over its entire term, an annual surveillance audit has to be performed with a positive outcome (12 months and 24 months after the certificate has been issued).

7. Surveillance audits
The annual surveillance audit verifies the efficacy and further development of the management system through random sampling. Surveillance audits are shorter than a normal audit and cover the deficiencies discovered in the last audit along with various key points of the requirements in the standard.

8. Re-certification audit
This has to be carried out before the certificate becomes invalid (usually after three years). In a re-certification audit (often also referred to as a repeat audit), all of the requirements are checked at random, the same as for a certification audit. The effort required for this repeat certification is less than that for an initial certification.

Following a positive decision on the certification, a new certificate valid for a further three years will be issued that also has to be confirmed by an annual surveillance audit.

More Tags:

Anti-corruptionAuditingCertificateCertification

Related solutions from the same sector: Certification

All Solutions

Discover more sectors:

AgricultureAutomotiveCommunications TechnologyConstruction & Real EstateElectronicsEnergyFoodstuffsHealth & MedicineIndustryIT & SecurityLeisure & EntertainmentMachineryMunicipalitiesScience & ResearchSports & FitnessSustainabilityTourismTrade & CommerceTransport & Traffic
  • QR Code

"*" indicates required fields

Land*
Address
This field is for validation purposes and should be left unchanged.

I am tami

tami Login tami by TÜV AUSTRIA

Are you here for the first time? I will be happy to help you find your way around.

Check certificate

Find a solution

Find a job at TÜV AUSTRIA.

tami by TÜV AUSTRIA - Your online platform

Submit science award

Check certificate

  • Person Certificate

  • Product Certificate

  • System Certificate

  • Verification of Conformity

Enter the data and check a certificate

Find a solution

How can I help you?

WiPreis einreichen

WiPreis submit

"*" indicates required fields

1
2
3
4
First, please select in which category you would like to submit*

Select region

<p>You cannot copy content of this page</p>